LOCTITE.JPG
 

ELASTOMERIC ADHESIVES

Elastomeric Adhesives are ideal for bonding and sealing a multitude of substrates and exhibit high resiliency while maintaining high tensile strength and adhesion all without the use of a primer.

TEROSON® MS 5510

LOCTITE MS 5510 ELASTOMERIC.PNG

TEROSON® MS 5510 is a high strength, high elongation, modified silane polymer, homogenous adhesive paste used for elastic bonding and sealing. It cures to an elastomeric thermoset product, is sag resistant and has a high initial tack. It is non-corrosive, free of solvents, isocyanates, silicones, PVC and is odorless. It has good adhesion to various substrates.​

TEROSON® MS 9399

LOCTITE 9399 ELASTOMERIC.PNG

TEROSON® MS 9399 is a highly viscous, sag-resistant, two-component adhesive based on silane-modified polymers, which cures independently of the atmospheric moisture to an elastic product. It is free from solvents, iscoyanates and silicones. TEROSON® MS 9399 has good UV and weathering resistance and can be employed for bonding both indoor and outdoors.

TEROSON® MS 939NA

LOCTITE 939NA ELASTOMERIC.PNG

TEROSON® MS 939NA is a black, white or gray, 1-part, low modulus, flexible, odorless modified silane polymer adhesive used for elastic sealing. It cures to an elastomeric thermoset product resistant to UV. It is sag-resistant leading to high initial tack. It is non-corrosive and free of solvents, isocyanates, silicones and PVC. The cure speed can be accelerated by using MS 9371B.​

TEROSON® MS 9320 SF

LOCTITE 9320 SF ELASTOMERIC.PNG

TEROSON® MS 9320 SF is a solvent- and isocyanate-free silane-modified polymer for the reproduction of flat- and wide-stream beads with OEM texture. Skin formation time is 10 to 20 min. Use any type of professional dispensing tool with a piston for application; best application results are achieved with the TEROSON® POWERLINE II COMPRESSED AIR GUN or TEROSON® ET AIR GUN MULTIPRESS for sprayable sealing. Surface preparation with TEROSON® VR 10 recommended.​