LOCTITE.JPG
 

THREADLOCKERS

Stop rust and corrosion, seal threads and prevent loosening from shock and vibration. Single component, clean and easy to apply threadlockers can be used on various sizes of fasteners and are available in a variety of viscosities and strengths for virtually any application.

LOCTITE® 263

LOCTITE 263 THREADLOCKER.PNG

LOCTITE® 263 is a red, dual cure, acrylic dimethacrylate ester fluorescent threadlocker designed for the permanent locking and sealing of threaded fasteners. It cures between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. It works on active metals (e.g. brass, copper) and passive substrates such as stainless steel and plated surfaces.

LOCTITE® 243

LOCTITE 243 THREADLOCKER_edited_edited.jpg

LOCTITE® 243 is a general purpose threadlocker that provides a medium strength bond. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g., motor oils, corrosion prevention oils and cutting fluid.

LOCTITE® 222

LOCTITE 222 THREADLOCKER_edited_edited_edited_edited.jpg

LOCTITE® 222 is a low-strength threadlocker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminum or brass. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.

LOCTITE® 248

LOCTITE 248 THREADLOCKER_edited.jpg

LOCTITE® 248 is a general purpose threadlocker with medium bond strength. This product is available in a convenient stick format. This threadlocker secures and seals bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids.

LOCTITE® 271

nnn271.JPG

LOCTITE® 271 is a red, high strength, low viscosity, methacrylate-based threadlocking adhesive, that features fixture times as fast as 5 - 15 minutes. This threadlocker can tolerate slight contaminations of industrial oils and is suitable for all metal fasteners. It also fluoresces under UV light to allow for monitoring.

LOCTITE® 242

n242.JPG

LOCTITE® 242 is a blue, medium strength, medium viscosity, methacrylate-based threadlocking adhesive for metal thread sizes up to M36. This product provides quick fixture times on steel, brass and stainless steel of 5, 15 and 20 min respectively. LOCTITE 242 is thixotropic to prevent migration after application and is intended for fasteners that require normal disassembly with standard hand tools.